|
CAN-1 has the following tools and accessories for sale: Return to Classifieds Page
TOOL #1
CNL / GAMMA MEMORY. This tool is complete with the interface box and ready to work. All that is required is the batteries need to be installed. The tools use a lithium battery, lasting approximately 100 hours of operation. All the tools I have for sale are new, unused and have the same components as listed below.
The tool components are as follows:
1-11\16" stainless steel pressure housing, tested to 14,000 psi.
Temperature tested to 300 degrees F.
1" x 8" Bicron MWD grade scintillation crystal, coupled to a hi-temp
Hamamatsu # 1808 PMT. Maximum count rate is 8,000 cps.
Near and far Reuter Stokes (GE) He3 Neutron detectors.
Part # RS-P4-0808-205 (far), Part # RS-P4-0806-207 (near).
Maximum count rate is 10,000 cps.
64 hours of memory at a sample rate of 1 data sample per second.
Xicor C7435 memory chip, model # XM28C040MHR-25.
TOOL # 2
CNL / GAMMA MEMORY. This tool is complete, but is not totally assembled. I have the neutron section, including the detectors, boards, and internal housing. Installation of the neutron section would take about 1 hour. The memory and gamma sections are intact and totally functional. I also have the internal housing and the external pressure housing as well as the source holder, landing sub and centalizers.
TOOL # 3
CNL / GAMMA MEMORY. This tool is not complete; it does not have the neutron section. The memory section is complete except for the chips. Included with this tool is the internal housing, pressure housing, etc.
In addition, I have spare source holders, landing subs, centralizers, sinker bars, battery packs and a magnetic collar locator. I also have some spare boards as well as various electronic components.
AnaLog Services, Inc. did not prepare, nor do we warrant the accuracy of the above ad.
If you are interested, contact or call and mention CAN-1.
|
|
